Position：home

ACPL-072L-560E: The Optocoupler for High-Speed Digital Isolation

Introduction

The ACPL-072L-560E is a high-speed digital optocoupler from Broadcom Limited (Avago Technologies). It is designed for high-speed digital isolation applications, such as AC and DC motor drives, power supplies, and industrial automation systems. The ACPL-072L-560E offers a number of advantages over traditional optocouplers, including higher speed, lower power consumption, and improved reliability.

Features and Benefits

The ACPL-072L-560E offers a number of features and benefits that make it an ideal choice for high-speed digital isolation applications, including:

High speed: The ACPL-072L-560E has a data rate of up to 100 Mbps, which is significantly higher than traditional optocouplers. This makes it ideal for applications that require high-speed data transfer, such as motor drives and power supplies.
Low power consumption: The ACPL-072L-560E has a low power consumption of just 2.5 mW per channel, which is significantly lower than traditional optocouplers. This makes it ideal for applications where power consumption is a concern, such as battery-powered devices.
Improved reliability: The ACPL-072L-560E has a number of features that improve its reliability, such as a high isolation voltage of 5 kV and a long creepage distance of 8 mm. This makes it ideal for applications where reliability is critical, such as industrial automation systems.

Applications

The ACPL-072L-560E is ideal for a wide range of high-speed digital isolation applications, including:

ACPL-072L-560E

AC and DC motor drives
Power supplies
Industrial automation systems
Medical equipment
Telecommunications equipment

Technical Specifications

The following table summarizes the key technical specifications of the ACPL-072L-560E:

ACPL-072L-560E: The Optocoupler for High-Speed Digital Isolation

Parameter	Value
Data rate	100 Mbps
Power consumption	2.5 mW per channel
Isolation voltage	5 kV
Creepage distance	8 mm
Operating temperature	-40°C to +105°C

Pinout

The following diagram shows the pinout of the ACPL-072L-560E:

[Image of ACPL-072L-560E pinout]

ACPL-072L-560E: The Optocoupler for High-Speed Digital Isolation

Introduction

Applications Information

The ACPL-072L-560E is a versatile optocoupler that can be used in a wide range of applications. The following are some tips and tricks for using the ACPL-072L-560E:

Use a bypass capacitor: A bypass capacitor should be connected between the VCC and GND pins of the ACPL-072L-560E to improve stability. The value of the bypass capacitor should be between 0.1 µF and 1 µF.
Use a pull-up resistor: A pull-up resistor should be connected between the OUT pin of the ACPL-072L-560E and the VCC pin. The value of the pull-up resistor should be between 1 kΩ and 10 kΩ.
Use a common-mode choke: A common-mode choke should be connected in series with the VCC and GND pins of the ACPL-072L-560E to reduce common-mode noise. The inductance of the common-mode choke should be between 1 mH and 10 mH.

Common Mistakes to Avoid

The following are some common mistakes to avoid when using the ACPL-072L-560E:

Do not exceed the maximum data rate: The ACPL-072L-560E has a maximum data rate of 100 Mbps. Exceeding the maximum data rate can cause errors and data loss.
Do not exceed the maximum power consumption: The ACPL-072L-560E has a maximum power consumption of 2.5 mW per channel. Exceeding the maximum power consumption can damage the device.
Do not expose the ACPL-072L-560E to extreme temperatures: The ACPL-072L-560E has an operating temperature range of -40°C to +105°C. Exposing the ACPL-072L-560E to extreme temperatures can damage the device.

Why the ACPL-072L-560E Matters

The ACPL-072L-560E is a high-performance optocoupler that offers a number of advantages over traditional optocouplers, including higher speed, lower power consumption, and improved reliability. This makes it an ideal choice for high-speed digital isolation applications, such as AC and DC motor drives, power supplies, and industrial automation systems.

ACPL-072L-560E: The Optocoupler for High-Speed Digital Isolation

Benefits of Using the ACPL-072L-560E

The ACPL-072L-560E offers a number of benefits over traditional optocouplers, including:

Increased efficiency: The ACPL-072L-560E's high speed and low power consumption make it an efficient choice for high-speed digital isolation applications.
Improved reliability: The ACPL-072L-560E's high isolation voltage and long creepage distance make it a reliable choice for applications where reliability is critical.
Reduced cost: The ACPL-072L-560E's low cost makes it an affordable choice for high-speed digital isolation applications.

Call to Action

If you are looking for a high-performance optocoupler for your next high-speed digital isolation application, the ACPL-072L-560E is the perfect choice. Order your ACPL-072L-560E today!