Flymo Blades: The Ultimate Guide to Keeping Your Lawn Looking Its Best

Flymo blades are an essential part of any lawn mower. They are responsible for cutting the grass, and the quality of your cut will depend on the quality of your blades. In this article, we will discuss everything you need to know about Flymo blades, including:

• The different types of Flymo blades
• How to choose the right Flymo blades
• How to install Flymo blades
• How to sharpen Flymo blades
• How to troubleshoot Flymo blades

By the end of this article, you will be an expert on Flymo blades and will be able to keep your lawn looking its best.

The Different Types of Flymo Blades

There are three main types of Flymo blades:

• Mulching blades cut the grass into small pieces that are then returned to the lawn as a natural fertilizer.
• Collecting blades cut the grass into larger pieces that are collected in the mower's grass bag.
• Scarifying blades are used to remove thatch and moss from your lawn.

The type of blade you choose will depend on your specific needs and preferences.

How to Choose the Right Flymo Blades

When choosing Flymo blades, it is important to consider the following factors:

• The size of your lawn
• The type of grass you have
• Your mowing habits

If you have a small lawn, you will need a smaller blade. If you have a large lawn, you will need a larger blade. The type of grass you have will also affect your choice of blade. For example, mulching blades are best for lawns with fine grasses, while collecting blades are best for lawns with thicker grasses. Finally, your mowing habits will also affect your choice of blade. If you mow your lawn frequently, you will need a blade that is durable and long-lasting.

How to Install Flymo Blades

Installing Flymo blades is a relatively simple process. However, it is important to follow the instructions carefully to avoid damaging the blades or your mower.

1. Turn off the mower and disconnect the spark plug.
2. Remove the old blades by loosening the bolts that hold them in place.
3. Clean the blade area and the bolts with a brush or rag.
4. Apply a small amount of grease to the bolts.
5. Install the new blades by tightening the bolts securely.
6. Reconnect the spark plug and start the mower.

Here is a helpful video that shows you how to install Flymo blades:

Video: How to Install Flymo Blades

How to Sharpen Flymo Blades

Flymo blades will need to be sharpened regularly to keep them cutting properly. You can sharpen Flymo blades using a file or a sharpening stone.

To sharpen Flymo blades with a file:

1. Clamp the blade in a vise.
2. Use a file to sharpen the blade at a 45-degree angle.
3. Repeat this process on the other side of the blade.

To sharpen Flymo blades with a sharpening stone:

1. Hold the blade against the sharpening stone at a 45-degree angle.
2. Move the blade back and forth across the stone.
3. Repeat this process on the other side of the blade.

Here is a helpful video that shows you how to sharpen Flymo blades:

Video: How to Sharpen Flymo Blades

How to Troubleshoot Flymo Blades

If you are having problems with your Flymo blades, there are a few things you can check:

• Make sure that the blades are sharp. Dull blades will not cut the grass properly.
• Make sure that the blades are installed correctly. Improperly installed blades can cause damage to the mower or the blades themselves.
• Make sure that the mower is properly adjusted. An improperly adjusted mower can put stress on the blades and cause them to break.

If you have checked all of these things and you are still having problems with your Flymo blades, you may need to contact a qualified repair technician.

Tips and Tricks

Here are a few tips and tricks for getting the most out of your Flymo blades:

• Sharpen your blades regularly. Sharp blades will cut the grass more cleanly and efficiently.
• Clean your blades after each use. Cleaning your blades will remove any grass clippings or debris that could cause them to dull.
• Store your blades in a dry place. Storing your blades in a dry place will help to prevent them from rusting.
• Replace your blades when they are worn out. Worn-out blades will not cut the grass properly and can cause damage to the mower.

Common Mistakes to Avoid

Here are a few common mistakes to avoid when using Flymo blades:

• Do not use dull blades. Dull blades will not cut the grass properly and can cause damage to the mower.
• Do not install blades incorrectly. Improperly installed blades can cause damage to the mower or the blades themselves.
• Do not adjust the mower incorrectly. An improperly adjusted mower can put stress on the blades and cause them to break.
• Do not use blades that are too small for your mower. Blades that are too small will not cut the grass properly and can cause damage to the mower.
• Do not use blades that are too large for your mower. Blades that are too large will not fit properly and can cause damage to the mower.

Step-by-Step Approach

Here is a step-by-step approach to keeping your Flymo blades in good condition:

1. Inspect your blades regularly.
2. Sharpen your blades as needed.
3. Clean your blades after each use.
4. Store your blades in a dry place.
5. Replace your blades when they are worn out.

By following these steps, you can keep your Flymo blades in good condition and ensure that your lawn always looks its best.

Pros and Cons

Pros:

• Flymo blades are durable and long-lasting.
• Flymo blades are easy to install and sharpen.
• Flymo blades are available in a variety of sizes and styles.

Cons:

• Flymo blades can be expensive.
• Flymo blades can be difficult to find in some areas.

Conclusion

Flymo blades are an essential part of any lawn mower. By following the tips and advice in this article, you can keep your Flymo blades in good condition and ensure that your lawn always looks its best.

Additional Resources

• Flymo website
• Flymo blades user manual
• How to choose the right Flymo blades
• How to install Flymo blades
• How to sharpen Flymo blades
• How to troubleshoot Flymo blades

Tables

|